[PCB] SSOP24 P=0.508mm and p=0.65mm Breakout

Josh

Member
On dark pcb's I like adding a silkscreen on top of traces, as it makes then a bit more fun. I wrote a plugin for kicad5 that did this and i only just moved it to kicad6. Here is an example. Msg me if you want the gerbers or just want a few boards. One side is a breakout for a SSOP24 with a pin pitch of 0.65mm and the back of same board is the breakout of a SSOP24 with a pitch of 0.508mm.

Renders:
front.png


back.png
 
Top