Codan Documentation Site

V

VK3ZYZ

Guest
Programming tool for later CODANS linked above, (xpdsk1 and xpdsk2) is on 2 floppies.
So, all I did was to copy both floppy images to one directory and combine the XPMENU.CFG files as below, (delete the old ones) and it seems to install ok when you run the INSTALL command.
It is a DOS program that hopefully will program the later radios (listed in the .CFG file below), not the 85xx series.
You will need to construct a lead. The info is in the manual, but I have not tried it as yet.

;x-2.exe, Install, x2, n, , X-2 Transceiver Programming
;x-3.exe, Program, x3, n, , 9323 Transceiver Programming, DOMESTIC=YES
;x-3.exe, Program, x3, n, , 9360 Transceiver Programming, DOMESTIC=NO
x-m.exe, Program, xm, n, , 9313 Transceiver Programming, DOMESTIC=YES
x-m.exe, Program, xm, n, , 9480 Transceiver Programming, DOMESTIC=NO
x-m.exe, Install, xm, n, , 9313 Transceiver Programming, DOMESTIC=YES
x-m.exe, Install, xm, n, , 9480 Transceiver Programming, DOMESTIC=NO
x-2.exe, Program, x2, n, , X-2 Transceiver Programming
x-3.exe, Program, chanfils\standard, n, , 9323 Transceiver Programming, TCVRTYPE=9323.RTD
x-3.exe, Program, chanfils\standard, n, , 9360 Transceiver Programming, TCVRTYPE=9360.RTD
x-3.exe, Program, chanfils\standard, n, , 9390 Transceiver Programming, TCVRTYPE=9390.RTD
x-3.exe, Program, chanfils\standard, n, , 9680 Transceiver Programming, TCVRTYPE=9680.RTD
x-3.exe, Program, chanfils\standard, n, , 9780 Transceiver Programming, TCVRTYPE=9780.RTD
X3RTDSel.exe, Program, chanfils\standard, n, , Land Transceiver Programming, TCVRTYPE=LAND
X3RTDSel.exe, Program, chanfils\standard, n, , Marine Transceiver Programming, TCVRTYPE=MARINE

I could not download the combined file as it is too big, so here are the floppies...


As well, the EPROM programming tool for early Codans 651PCxxCODAN.zip...
 

Attachments

Last edited by a moderator:
V

VK3ZYZ

Guest
Here is an EPROM for the Codan 8525A.
It has the following channels...

Chan TxRxFreq RxFreq Options Enabled Chan TxRxFreq RxFreq Options Enabled
1 3600.0 LU O 21 3700.0 LU O
2 3605.0 LU O 22 3705.0 LU O
3 3610.0 LU O 23 3710.0 LU O
4 3615.0 LU O 24 3715.0 LU O
5 3620.0 LU O 25 3720.0 LU O
6 3625.0 LU O 26 3725.0 LU O
7 3630.0 LU O 27 3730.0 LU O
8 3635.0 LU O 28 3735.0 LU O
9 3640.0 LU O 29 3740.0 LU O
10 3645.0 LU O 30 3745.0 LU O

11 3650.0 LU O 31 3750.0 LU O
12 3655.0 LU O 32 3755.0 LU O
13 3660.0 LU O 33 3760.0 LU O
14 3665.0 LU O 34 3765.0 LU O
15 3670.0 LU O 35 3770.0 LU O
16 3675.0 LU O 36 3775.0 LU O
17 3680.0 LU O 37 3780.0 LU O
18 3685.0 LU O 38 3785.0 LU O
19 3690.0 LU O 39 3790.0 LU O
20 3695.0 LU O 40 5354.0 LU O



41 5357.0 LU O 61 7135.0 LU O
42 5360.0 LU O 62 7140.0 LU O
43 5363.0 LU O 63 7145.0 LU O
44 7050.0 LU O 64 7150.0 LU O
45 7055.0 LU O 65 7155.0 LU O
46 7060.0 LU O 66 7160.0 LU O
47 7065.0 LU O 67 7165.0 LU O
48 7070.0 LU O 68 7170.0 LU O
49 7075.0 LU O 69 7175.0 LU O
50 7080.0 LU O 70 7180.0 LU O

51 7085.0 LU O 71 7185.0 LU O
52 7090.0 LU O 72 7190.0 LU O
53 7095.0 LU O 73 7195.0 LU O
54 7100.0 LU O
55 7105.0 LU O
56 7110.0 LU O
57 7115.0 LU O
58 7120.0 LU O
59 7125.0 LU O
60 7130.0 LU O
 

Attachments

Last edited by a moderator:
V

VK2RK

Guest
I have a friend in QLD, Ron Southworth VK4AGL, scadaperspective@gmail.com

I am sure he can help with all matters to do with Codan, he has and still working on them, I am sure he can fill any knowledge gaps.
 
Top